English
For irregularly shaped, circular, or curved products, the system uses a CCD camera to capture the outer contour, automatically calculates the product's center, and applies axis compensation. It then drives the dispensing control system to perform automatic dispensing. The conversion of 3D trajectories is simple and intelligent, ensuring precise positioning.
The equipment can capture "MARK" points from a standard product to serve as a positioning template for real-time comparison, or it can locate products by detecting their edges. It provides timely alarms for anomalies, effectively preventing errors such as misplacement or missed dispensing.
• Replaces manual loading/unloading to enable unmanned factory operations
• Interfaces with upstream and downstream conveyor lines for integrated inline operation
• Supports material input and output from any direction
• Allows for rapid switching of loading/unloading pickup methods
• Features dual pickup mechanisms—vacuum suction and pneumatic grippers—to accommodate various material feed methods during inline operation
| Basic Parameters | AM300IC |
| Power | 220V 3.6KW 16A 50/60Hz |
| Air Pressure | 90 psi (5.5 bar) |
| Dimensions | 1450 x 1300 x 1700 (W x D x H) (including conveyor dimensions) |
| Machine Weight | 850 kg |
| Communication Protocol | SMEMA |
| Drive System | Linear Motor (XY), Servo Motor (Z/A), DDR (C) |
| Operating System | Win7/10 |
| Dispensing Area | 200 x 100 mm |
| XYZ Travel | 450 x 600 x 200 mm |
| XYZ Axis Positioning Accuracy | XY: ±8 μm, Z: ±10 μm (3σ) |
| XYZ Axis Repeatability | XY: ±3 μm, Z: ±5 μm (3σ) |
| Maximum Speed | 1200 mm/s |
| Maximum Acceleration | 1.5g |
Address
5th Floor, Building 2, No. 182, Chang'an Xi'an Road, Chang'an Town, Dongguan, Guangdong Province, China.
Tel
