English
• High-precision integrated frame structure;
• Imported precision-grade ball screws;
• Closed-loop servo control system;
• Maximum operating speed of 600 mm/s; repeatability of ±25 μm.
• Reinforced profile rails equipped with stainless steel chains;
• Supports various conveyor configurations, such as single-stage and dual-stage systems.
• User-friendly interface that is easy to learn and operate;
• Switchable Chinese/English interface;
• Expandable MES integration.
• Mark recognition function ensures the motion path is corrected based on shifts in Mark positions;
• Intuitive programming function facilitates rapid setup.
• Laser height sensing module ensures consistent dispensing height;
• Dispensing weight monitoring system tracks dispensing stability;
• Needle calibration system automatically corrects needle offset.
| Basic Parameters | AC-500HC |
| Power Supply | 220V 50/60Hz 2.5KW |
| Air Pressure | 80psi (5.5bar) |
| Dimensions | 990*1300*1630mm (W*D*H) |
| Weight | 600kg |
| Exhaust Requirements | Diameter 200mm; Airflow >13m³/min |
| Communication Protocol | SMEMA |
| Dispensing Area | 450*450*100mm (Single Valve) |
| Certification Standards | CE/UL |
| Motion Type | Servo Motor + Ball Screw |
| X-axis Travel | 460mm |
| Y-axis Travel | 550mm |
| Z-axis Travel | 100mm |
| X/Y-axis speed | 600mm/s |
| X/Y-axis acceleration | 0.8g |
| Z-axis speed | 300mm/s |
| Z-axis acceleration | 0.3g |
| X/Y/Z-axis repeatability | ± 25μm @ 3σ |
| Control method | Industrial PC + Motion control card |
| Conveyor height | 870-950mm |
| Conveyor speed | 400mm/s |
| Width adjustment method | Automatic width adjustment |
| Width range | 40-500mm |
| Minimum board edge width | 3mm |
| Rail product length capacity | 800mm (Single-section) |
| Rail load capacity | 10kg |
| Board clearance height | Top 100mm / Bottom 100mm |
Address
5th Floor, Building 2, No. 182, Chang'an Xi'an Road, Chang'an Town, Dongguan, Guangdong Province, China.
Tel
